TECHNICAL SPECIFICATIONS
• Model : MP21-25 (8 Sets)
• Max. RPM : 25,000 rpm
• Power : 90 - 750 Watt
• Weight : 1.0 Kg
• Concave Size :
- 1/8" Shank : 9.5mm, 7.2mm, 4.8mm
- 1/4" or 6mm Shank (option) : 25.40mm, 19.00mm, 15.90mm, 12.70mm, 9.5mm
• Concave Length : 54.00mm (1/4" and 6mm)
25.00mm (1/8")
Check your Shank Size & Collet
Die grinder or other tools are not included.
Please check your "Shank" of Collet.
Dremel or small hand piece grinder : 1/8" Shank
Die & Straight grinder : 1/4" Shank or 6mm Shank.
① 4 Edge Cutter
- Reduce the heat and cutter wood
② Various Size
- 1/8" Shank : 9.5mm, 7.2mm, 4.8mm
- 1/4" or 6mm Shank (option) : 25.40mm, 19.00mm, 15.90mm, 12.70mm, 9.5mm
③ Shank Size
- 1/8" Shank for Dremel size
- 1/4" or 6mm Shank for Die grinder size
Vertical Divider
Concave Eye Cutter (8 Sets) Contents
① ø25.40 mm x 54.00 (h) mm
② ø19.00 mm x 54.00 (h) mm
③ ø15.90 mm x 54.00 (h) mm
④ ø12.70 mm x 54.00 (h) mm
⑤ ø9.5 mm x 54.00(h) mm
⑥ ø9.5 mm x 25.00 (h) mm
⑦ ø7.2 mm x 25.00 (h) mm
⑧ ø4.8 mm x 25.00 (h) mm
- Please read and follow all safety instructions carefully. Please keep the manual for future reference.
- When operation, always wear safety equipment such as face masks and safety goggle.
- Always secure the workpiece securely when working.
- Make sure that the grinder switch is off before plugging in the power cord.
- Be careful not to touch the cutter blade. Serious injury may result.
- Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.
- When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.
- After operation, turn off the switch and set it down when The remaining rotation stop completely.
- Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.
- Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.
- Inspect and tighten the bolts of each part before operation.
- After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
- If the cutter blade or belt is worn out, replace it with a new one.
- Manufacturer : Manpatools
- Country of manufacture : Made in republic of korea.
- Address : Manpa corporation, 700-20 manseo-ro, Yangseong-myeon, Anseong-si, Gyeonggi-do
- Phone number : 010-8777-5735 / (031)-676-9212
- Website. : http://www.manpatools.com