Mini Carving Bits - DCT
SKU:
$56.00
$56.00
Unavailable
per item
Mini Carving Bits - Triangle Type, 1/8" ShankÂ
​
Includes :Â
• One - Mini Carving Bits(Triangle Type)Â
​​Features :Â
• Smooth & Power Carving with Sharp Cutter 5mm
• Detail & Sculpting Performance
• Specialized for Textures.Â
​
*Check your Shank Size.
​
Includes :Â
• One - Mini Carving Bits(Triangle Type)Â
​​Features :Â
• Smooth & Power Carving with Sharp Cutter 5mm
• Detail & Sculpting Performance
• Specialized for Textures.Â
​
*Check your Shank Size.
TECHNICAL SPECIFICATIONS
• Model : MP21-24-DCT
• Max. Blade Diameter : 16 mm
• Max. Carving Depth : 22 mm
• Max. RPM : 25,000 rpm
• Power : 90 - 750 Watt
• Shank Size : 1/8"
• Weight : 0.1 Kg
• Overall Length : 35 mm
• Blade Type : Triangle
• Blade Width : 5 mm
• Number Of Teeth : 3 EA
Check your Shank Size & Collet
Dremel or other tools are not included.
Please check your "Shank" of Collet.
Mini Carving bits : 1/8" Shank.
- Please read and follow all safety instructions carefully. Please keep the manual for future reference.
- When operation, always wear safety equipment such as face masks and safety goggle.
- Always secure the workpiece securely when working.
- Make sure that the grinder switch is off before plugging in the power cord.
- Be careful not to touch the cutter blade. Serious injury may result.
- Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.
- When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.
- After operation, turn off the switch and set it down when The remaining rotation stop completely.
- Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.
- Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.
- Inspect and tighten the bolts of each part before operation.
- After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
- If the cutter blade or belt is worn out, replace it with a new one.
- Manufacturer : Manpatools
- Country of manufacture : Made in republic of korea.
- Address : Manpa corporation, 700-20 manseo-ro, Yangseong-myeon, Anseong-si, Gyeonggi-do
- Phone number : 010-8777-5735 / (031)-676-9212
- Website. : http://www.manpatools.com