2" Belt Cutter - Head
SKU:
$125.00
$125.00
per item
Recommended for 3" Multi cutter Users
(Head change performance)
*Only 2" Blades can be used.
Includes :
• One - 2" Circular Cutter 6mm
• Belt Cutter Head
​​Features :Â
• Smooth Carving with Sharp Carbide
• Detail & Sculpting Performance
• Vibration Reduction
​
*Angle grinder is not included
Please check your "Spindle size" and "angle grinder".
(Head change performance)
*Only 2" Blades can be used.
Includes :
• One - 2" Circular Cutter 6mm
• Belt Cutter Head
​​Features :Â
• Smooth Carving with Sharp Carbide
• Detail & Sculpting Performance
• Vibration Reduction
​
*Angle grinder is not included
Please check your "Spindle size" and "angle grinder".
TECHNICAL SPECIFICATIONS
• Model : MP21-2-H
• Max. Blade Diameter : 45 mm
• Max. Carving Depth : 10 mm @ 2” Blades
• Max. RPM : 16,500 rpm @ extension spindle
• Power : 630 ~750 Watt
• Disc Bore Size: 9.5 mm
• Weight : -
• Overall Length : -
• Working Width : 10 mm @ 2” Blades
• Blade Width : 6, 8 mm (option)
• Number Of Teeth : 3 EA @ 2” Blades
Angle Grinder : Spindle Size & Model
Angle grinder is not included.
Please check your "Spindle size" and "angle grinder".
M10 : Fit to Bosch, Makita
M14 : Fit to Bosch : 1375A, GWS8-45, GWS9-45, GWS18V-45
Makita : GA4030K, GA4030, GA4530K, GA4530, GA4534, GA4530X, 9557NB, 9556NB, 9558PB, 9557PB, 9565PCV, GA4542C
XAG042Z, XAG09Z, XAG11Z, XAG16Z, XAG20Z, XAG17ZU, XAG21ZU.
Dewalt : DCG405B, DWE4011, DWE4012, DWE4120, DWE4120N
Milwaukee : 2783-20(22,22HD), 2781-20(21,22,22HD), 2980-20(21-22), 2981-20(21,22)
5/8"-11 : Fit to Bosch : 1375A, GWS8-45, GWS9-45, GWS18V-45
Makita : GA4030K, GA4030, GA4530K, GA4530, GA4534, GA4530X, 9557NB, 9556NB, 9558PB, 9557PB, 9565PCV, GA4542C
XAG042Z, XAG09Z, XAG11Z, XAG16Z, XAG20Z, XAG17ZU, XAG21ZU.
Dewalt : DCG405B, DWE4011, DWE4012, DWE4120, DWE4120N
Milwaukee : 2783-20(22,22HD), 2781-20(21,22,22HD), 2980-20(21-22), 2981-20(21,22)
① Changeable System
- Basic diameter : 45 mm (½ size of original 4” angle grinder diameter)
- Various shape & Size wheel : Triangle, Square, Round and Sanding.
- Big head change : 3" Multi Cutter head can be installed.
② Replaceable Tungsten Carbide
- Easy to change when worn
- Circular type for carving any multiple direction
③ Safety Cover
- Prevention of kick back
- Prevention of sawdust flying
Angle Change Performance. Depending on your working areas, Users can change its angle 90Ëš - 180Ëš easily. There is no areas it can't go.
Various Blades Performance. The Sahft & Nut can be seperate. Then User can pick the right blade shape and change it easily with special spanner. Shape : Triangle, Sqaure, Round 12mm etc.
Sanding Performance. It can install Rough sanding(Tungsten Carbide) for first sanding. Then, can install Sanding Flex(Rubber backer pad) for finish sanding.The sanding function has been higly enhanced.Vertical Divider
Extension Performance. Basic length of it is 200mm which is manufactued based on human body structure. Then its extenstion can help to reach the deep areas up to 270, 350mm.
Head Change Performance. Its basic head is for 2" cutter. Can't use 3" & 4" diameter cutter. But by only changing 3" Mult cutter head, It can use all 2" - 4" cutter.
Belt Cutter – Head Contents
① Belt cutter Housing & 2" Circular cutter 6mm
② Star Wrench
- Please read and follow all safety instructions carefully. Please keep the manual for future reference.
- When operation, always wear safety equipment such as face masks and safety goggle.
- Always secure the workpiece securely when working.
- Make sure that the grinder switch is off before plugging in the power cord.
- Be careful not to touch the cutter blade. Serious injury may result.
- Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.
- When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.
- After operation, turn off the switch and set it down when The remaining rotation stop completely.
- Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.
- Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.
- Inspect and tighten the bolts of each part before operation.
- After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
- If the cutter blade or belt is worn out, replace it with a new one.
- Manufacturer : Manpatools
- Country of manufacture : Made in republic of korea.
- Address : Manpa corporation, 700-20 manseo-ro, Yangseong-myeon, Anseong-si, Gyeonggi-do
- Phone number : 010-8777-5735 / (031)-676-9212
- Website. : http://www.manpatools.com